KOMO Certification and Testing for Rubbers and Adhesives

KOMO certification under Kiwa evaluation guideline BRL2013 applies to products which, at least partly, have been manufactured from rubber(s) are intended for use as seals in piping systems for the transport of cold and hot water.

The intended systems comprehend plastics, metal and concrete piping, fittings and connectors. The systems are intended for underground as well as above ground applications. Seals for pipes, fittings and connectors made of glass reinforced plastics (GRP) are also included in the scope.

The BRL 2013 evaluation guideline is a certification scheme for vulcanized rubber products for cold and hot non-drinking water applications. More specific; for seals, applications for drainage, sewerage, rainwater and heating. For drinking water application, we refer to evaluation guideline K17504.

Download BRL-2013 Evaluation Guideline

KOMO certification under Kiwa evaluation guideline BRL5220 applies to flexible rubber connectors with a diameter up to 1300 mm and intended for use in non-pressure sewage applications. The couplings can be used as fittings as a construction connection to facilitate new connections to the sewer.

The BRL 5220 evaluation guideline is a certification scheme for flexible rubber connectors for non-pressure sewage systems.

The harmonised European standard EN 681-1 is applicable to a few products within the scope of this Evaluation guideline.

Download BRL-5220 Evaluation Guideline

In your request for quote, indicate for which products and which technical area you want to be certified. For this evaluation guideline it is: F2 piping systems.

KOMO certification under Kiwa evaluation guideline BRL2020-1 applies to TPE pipe joints intended for use in seals in piping systems for non-pressure underground drainage and sewerage at temperatures up to 45°C, intermittently up to 90 °C.

The BRL2020-1 evaluation guideline is a certification scheme for TPE pipe joint seals for non-pressure wastewater and drainage -material.

Download BRL-5220-1 Evaluation Guideline

In your request for quote, indicate for which products and which technical area you want to be certified.

KOMO certification under Kiwa evaluation guideline BRL2020-2 applies to different types of TPE seals which, at least partly, have been manufactured from TPE are intended for use in piping systems for non-pressure underground drainage and sewerage at temperatures up to 45°C, intermittently up to 90 °C.

The BRL2020-2 evaluation guideline is a certification scheme for TPE pipe joint seals for non-pressure wastewater and drainage - seals.

For the products belonging to the scope of this Evaluation Guideline, EN 681-2 is the harmonised European standard applicable.

Download BRL-2020-2 Evaluation Guideline

KOMO certification under Kiwa evaluation guideline BRL2020-2 concerns adhesives for joints in plastics piping systems for non-pressure sewerage inside buildings according to NEN-EN 1329 (PVC-U), NEN-EN 1455-1 (ABS), NEN-EN 1566-1(PVC-C) and NEN-EN 1565-1(PVC+SAN) with nominal outside diameters up to and including 160mm and wastewater temperatures up to 90°C.

The BRL 5221 evaluation guideline is a certification scheme for adhesives for joints in plastic pipe systems for indoor sewerage.

Download BRL-5221 Evaluation Guideline

In your request for quote, indicate for which products and which technical area you want to be certified. For this evaluation guideline it is: F2 piping systems.